
INTRODUCE
A DC/DC high voltage input power supply is a device that converts a high voltage DC power supply into a DC power supply of a different voltage level. They are widely used in a variety of applications
FEATURES
lUltra-small size, save space
lInput and output isolation
lUniversal input voltage: 85-264VAC/100-370VDC
lOutput overcurrent protection, short circuit protection
lThis series of products are widely used in industry, power, instrumentation, communication, smart home and other fields
SPECIFICATIONS
Project  | Condition  | Minimum  | Typical Value  | Maximum  | 
Output voltage accuracy  | /  | ±5%  | /  | |
Linear regulation rate  | Full load  | /  | ±3%  | /  | 
Load regulation rate  | 10%-100% load  | /  | ±5%  | /  | 
Output ripple noise*  | 20MHz bandwidth (peak-to-peak)  | /  | 100mV  | /  | 
Short circuit protection  | Can be short-circuited for a long time, self-recovery  | |||
Output overcurrent protection  | ≥110%Io, self-recovery  | |||
Minimum load  | 0  | /  | /  | |
Power-off hold time  | /  | 20ms  | /  | |
Operating temperature  | -25℃  | /  | +70℃  | |
Storage temperature  | -40℃  | /  | +105℃  | |
Storage humidity  | /  | /  | 95%RH  | |
Switching frequency  | /  | 40kHz  | /  | |
Insulation voltage  | Input to output, test 60s, ≤5mA 
  | 3000VAC  | /  | /  | 
MTBF  | 
 MIL-HDBK-217F@25℃  | 215000h  | /  | /  | 
Note: *Ripple and noise are tested using the parallel line test method (the oscilloscope probe is close to the test, and a 10μF high-frequency low-resistance electrolytic capacitor and a 0.1μF ceramic capacitor are connected in parallel at the test point).  | ||||
MODEL LIST
Model  | Input voltage range  | Output Power  | Rated output voltage( V )  | Rated output current( mA )  | Size (Length * Width * Height)  | 
IPS05-T2S05  | 
 
 
 85-264VAC/100-370VDC 
  | 5W  | 5VDC  | 1000mA  | 39.5*26.0*22.0 mm  | 
IPS05-T2S12  | 12VDC  | 420mA  | |||
IPS05-T2S24  | 24VDC  | 210mA  | |||
IPS05-T2S05-S  | 5VDC  | 1000mA  | |||
IPS05-T2S12-S  | 12VDC  | 420mA  | |||
IPS05-T2S24-S  | 24VDC  | 210mA  | |||
Remark: The “ S ” suffix indicates a safety version . " suffix is the normal version.  | |||||